Shop
Showing 461–480 of 731 resultsSorted by popularity
Best Welds .035 Tweco 14 Series Heavy Duty Contact Tip
Best Welds .035 Tweco 14 Series Heavy Duty Contact Tip
Tweco Style 14H-35 14 series heavy duty contact tip
Compatible with:
- Anchor Brand/ Best Welds 250/400
- Tweco No 2
- Tweco No 3
- Tweco No 4
Best Welds 1/16″ Tweco 14 Series Heavy Duty Contact Tip
Best Welds 1/16″ Tweco 14 Series Heavy Duty Contact Tip
Best Welds Tweco style 14 series 14H-116 heavy duty 1/16″ contact tip.
Compatible with:
- Anchor Brand/ Best Welds 250/400
- Tweco No 2
- Tweco No 3
- Tweco No 4
Best Welds 1/16″ Tweco 14 Series Contact Tip
Best Welds 1/16″ Tweco 14 Series Contact Tip
Best Welds Tweco style 14-116 contact tip
Compatible with MIG guns:
- Anchor Brand 250/400
- Tweco No 2
- Tweco No 3
- Tweco No 4
Best Welds .035 Miller Style Contact Tip – 10 pack
Best Welds .035 Miller Style Contact Tip – 10 pack
Contact tips 135430 for Miller® and Hobart® style spool guns. Tips are direct replacement for XR Edge, XRM15/30A, 15/30W and Spoolmatic™ 30A/W with straight (180 deg.) neck assembly.
These tips are not compatible with the FASTIP™ option available from Miller®
Best Welds .030 Tweco 11 Series Tapered Contact Tip
Best Welds .030 Tweco 11 Series Tapered Contact Tip
Best Welds Tweco Style 11 Series .030 Tapered Contact Tip
Compatible with:
- Anchor Brad 135 Gun
- Best Welds® 135 Gun
- Tweco® Mini ®
- Tweco No.1 Gun
Valved “Y” Connections, 200 PSIG, Brass, Female/Male, RH, 9/16″ – 18
Valved “Y” Connections, 200 PSIG, Brass, Female/Male, RH, 9/16″ – 18
Weldmark Chipping hammer with Spring Handle Chisel Pick
Weldmark Chipping hammer with Spring Handle Chisel Pick
Blue Demon Low Fuming Brazing Bare 1# Tube
Blue Demon Low Fuming Brazing Bare 1# Tube
Blue Demon Low fuming bronze (bare and flux coated) is a general-purpose, copper base alloy brazing rod used extensively for gas brazing steel, copper alloys, cast iron, nickel alloys and stainless steel. Its low fuming characteristic and good mechanical properties make this alloy a widely used general-purpose product. Preheating is recommended for some applications and a bronze brazing flux is required if the rod is not coated. This brazing rod has a low melting point making it easily machinable and excellent for sheet metal work. This alloy also possesses high tensile strength and good ductility.
Irwin Original Locking C-Clamp with Regular Tips
Irwin Original Locking C-Clamp with Regular Tips
The Original™ Locking C-Clamps with Regular Tips Features:
- Wide-opening jaws provide greater versatility in clamping a variety of shapes
- Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
- Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
- Classic trigger release designed to provide maximum locking force
- Jaw Capacity 3-3/8”
- Size 11”, 18″
StrongHand Tools MiniMagnet 6 pack
StrongHand Tools MiniMagnet 6 pack
At just 2-5/16″ in height, Mini Magnets provide low profile holding of stock in tight, hard to reach areas.
Use as many as needed for light duty holding of stock at multiple points for greater accuracy in fixturing with odd-shaped stock.
Perfect for use around the shop, and compact enough to carry along for use out in the field
Specifications:
▪ Package: 6-Pack
▪ Angles: 30°, 60°, 45°, 90°
▪ Max. Pull Force: 25 LBS
▪ Dimensions: 2-5/16 x 2 x 5/8″
▪ Weight: 1.7 LBS
4,800# Heavy Duty 4-in-1 Utility Clamp
4,800# Heavy Duty 4-in-1 Utility Clamp
The 4-in-1 Utility Clamping System is the most versatile Sliding Arm Clamps in the market.
The three piece 4-in-1 Clamp Kit includes:
▪ Sliding Arm Clamp
▪ Extended Block
▪ V-Pad
All Strong Hand Tools® Utility Clamps are made of high quality heat treated steel and nickel/chrome plated for strength and durability.
Specifications:
- 4,800 lbs. Clamping Pressure
- 12 ½” Capacity
- Throat Depth 7”
- Weight 12.3 lbs.
Kimberly-Clark Kleenguard A20 Breathable Particle Protection Coveralls
Kimberly-Clark Kleenguard A20 Breathable Particle Protection Coveralls
FEATURES & BENEFITS
Kleenguard A20 Breathable Particle Protection Coveralls with Hood and Boots are designed to move with you – and your employees – while protecting against hazardous and non-hazardous dust. These protective garments offer superior particle holdout coupled with unmatched comfort attributes. The A20 fabric is comprised of five layers of stacked barrier protection (SMMMS) against hazardous particles. Features to provide more protection include the seamless front (for primary exposure area), 1 inch zipper flap, hood, boots and elastic back, wrists and ankles. They feature Reflex design, which offers excellent fit (with elastic back) and freedom of movement. The seamless front provides more protection to the primary exposure area. They are a popular choice for dusty environments such as laboratories and remediation, as well as pesticide applications and as decontamination modesty garments.
· Kleenguard A20 are designed to protect against dirt, grime and dust and are made with breathable Microforce barrier fabric
· Reflex Coverall Design offers excellent fit and freedom of movement (also includes hood, boots, elastic back, zipper with 1″
Tillman Medium Weight MIG Glove
Tillman Medium Weight MIG Glove
Tillman Brown Top Grain Goatskin Fleece Lined MIG Glove
FEATURES
- A Top grain Goatskin palm for best feel, Cowhide split back resists heat.
- Fleece lined for added heat protection without the bulk.
- Straight thumb for best gun grip.
- Thumb strap reinforcement for extra strength.
- Elastic back for snug fit.
- 3-1/2 in cuff for added protection.
- Sewn with Kevlar® stitching to protect seams.
Tillman TrueFit Deerskin Work Glove
Tillman TrueFit Deerskin Work Glove
Tillman Blue/Gold Top Grain Deerskin Leather Palm Mechanics Glove
Features
- Top grain gold Deerskin construction for all day comfort and protection
- Leather and spandex design will outlast and outperform all-synthetic high dexterity gloves
- Rough side out double palm for longer life and better gripping power
- Reinforced thumb to protect severe stress areas
- Smooth surface fingers for improved handling
- Elastic cuff with hook and loop closure provides secure fit, less bulk
- Top grain leather side bolsters add additional protection for side surface work
- All finger tips covered in leather for heavy wear area protection
- Not designed for welding
Black Stallion 18oz White Fibre Glass Welding Blanket
Black Stallion 18oz White Fibre Glass Welding Blanket
Light Duty Welding Blanket
The 18 oz. light duty heat cleaned tan fiberglass welding blankets are resistant to sparks, and are FM approved. These blankets are to be used on a vertical plane only.
- Light duty welding blanket
- 18 oz. heat cleaned tan fiberglass
- Melting temperature of 1000° F
- Protect against sparks
- Use on a vertical plane only
- FM approved
- Grommeted on all sides 36″ apart
- Finished blankets may vary up to 3″ in height and width
Propylene
Propylene
Purchase Cylinder
Purchase Price Includes: Cylinder + Gas + Fees
Details
▪ Cylinder will come with valid DOT stamp, current hydrostatic test stamp, and a record of ownership.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Purchased cylinders may be exchanged or refilled at any gas supplier
Lease Cylinder
Lease Price Includes: A Full Cylinder + Maintenance Costs
Details
▪ 5 year lease length
▪ Early termination of the lease is available without additional charges.
▪ Leased cylinders can only be refilled/exchanged at a Toll location.
▪ Cylinder exchange/refills charges are not included in lease and will be charged at the time of exchange.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Leased cylinders must be returned at the end of the lease agreement or customer will be charged the replacement cost of the cylinder.
Exchange/Refill Cylinder
Price Includes: Gas + Fees
Details
▪ Only cylinders owned by customer, rented or leased from Toll are eligible for exchange/refill.
▪ Empty cylinders can be exchanged for a full cylinder at store location.
▪ Exchanged tank will be of like gas and size.
▪ An additional hydrostatic test fee may apply on customer owned cylinders upon visual inspection.
▪ Cylinder appearance is not guaranteed to look new or be of similar condition as the cylinder that is exchanged.
Other Options Available In Store:
Rent Cylinder
Cylinders are available to rent daily, weekly, and monthly upon approved credit. Please contact us directly for details.
Cylinder Disposal
Cylinder disposal or recycling is available for common gases. We reserve the right to refuse any cylinder upon visual inspection.
Cylinders we will not accept for disposal include:
▪ Inhalation hazard
▪ Poisons
▪ Refrigerants
▪ Any cylinders with a missing label
▪ Uncommon cylinder sizes
Dupont ProShield 6 SFR Coveralls with Attached Hood
Dupont ProShield 6 SFR Coveralls with Attached Hood
DuPontâ„¢ ProShield® 6 SFR Coverall. Standard Fit Hood. Elastic Wrists and Ankles. Serged Seams. Blue.
Features:
ProShield® 6 SFR is a cost-efficient disposable overgarment designed to help protect and preserve primary flame resistant garments. ProShield® 6 SFR garments are intended to be worn over primary flame resistant garments to provide a barrier against non-hazardous particles and aerosols. ProShield® 6 SFR garments are designed to not contribute to additional burn injury in the event of an industrial fire or electric arc event. ProShield® 6 SFR garments will not ignite and continue to burn after the flame source is removed. ProShield® 6 SFR garments are an excellent choice as a cost efficient cover to protect reusable FR garments.
Applications include Steel Mills, Coal Mines, Maintenance Work, Refineries, Laboratories, Utilities
▪ Attached hood with elastic around face opening
▪ Elastic opening for tighter fit at wrist
▪ Elastic opening for tighter fit at ankle
Specifications:
▪ The garment shall be constructed of DuPontâ„¢ ProShield® 6 SFR — a nonwoven wood-pulp/polyester fabric that is treated to provide flame retardancy and liquid repellancy characteristics.
▪ The garment shall be blue in color.
▪ The garment shall be a hooded coverall design.
▪ The garment shall have serged seams.
▪ The garment shall have a standard hood with elastic around the face.
▪ The garment shall have a front zipper closure.
▪ The garment shall have elastic wrists.
▪ The garment shall have elastic ankles.
Tempil Temperature Indicator 350.0 Degree F
Tempil Temperature Indicator 350.0 Degree F
Providing accuracy, confidence, and compliance for over 80 years, Tempilstik® is the original temperature-indicating stick with the best combination of precision and convenience for surface temperature measurement. Specially engineered for accurate temperature indication in pre-heating, interpass and post-weld heat treating applications,Tempilstik is the industry’s leading choice for use in the most critical jobs.
Features:
▪ Stick instantly melts at designated temperature for easy and immediate visual inspection.
▪ Calibration-free with 100% reliability
▪ NIST traceable accuracy to +/-1 %
▪ Rugged and easy-to-use
▪ Simple – no gauges or electronics
▪ Unique slip-resistant metal holder, specifically engineered for smooth operation and maximum user control
▪ Free of contaminants such as sulfur, lead and halogens
▪ Efficient; fast results reduce set up and down time
