TIG Torches & GTAW Parts
Find premium TIG torches and GTAW parts at Toll Gas Supply, designed for precision and durability in TIG welding applications. Our extensive selection includes torches, collets, cups, and other accessories to enhance your welding performance.
Showing 1–20 of 111 results

Metal Man Heavy Duty Single/Dual Bottle Welding Cart
Metal Man Heavy Duty Single/Dual Bottle Welding Cart
The METAL MAN Heavy Duty Single/Dual Bottle Welding Cart is designed for multiple uses. It can be used to hold portable wire welders, plasma cutters and TIG welders along with the bottle of shielding gas needed for that application. Its unique Cylinder rack allows you to configure it to carry one bottle of gas up to 10 inches in diameter and up to 300 cu. Ft.; or two separate bottles of gas up to 7-1/2 inches in diameter or 150 cu. Ft each. Or use this welding cart to hold two separate welders or a welder and a plasma cutter. The third use for this Cart is as a power source and feeder cart. The bottom shelf has an 18 inch clearance, giving ample space to store a smaller, inverter-based welding power source on the bottom shelf. The top shelf has ample space to fit a wire feeder. In addition, the top of the cylinder securement rack can be removed to accommodate the wire feeder spool holder and a large spool of wire.
SPECIFICATIONS:
- Holds one 10” dia. Cylinder or two 7-1/2” dia. Cylinder
- Fold Down Handle
- Wrap Around Cable Holders
- 400 lb. Capacity
- 8” Rear Wheels
- 2 Locking Front Casters
- Removable Top Cylinder Rack For Industrial Wire Feeder Applications
- 18 Gauge Steel Construction with Powder Coat Finish
FEATURES:

Weldmark 1/8″ TIG Gas Lens Body For HW-9,20,20H,24W,25 Torches
Weldmark 1/8″ TIG Gas Lens Body For HW-9,20,20H,24W,25 Torches

Weldmark 3/32″ TIG Gas Lens Collet Body For HW-9,20,20H,24W,25 Torches
Weldmark 3/32″ TIG Gas Lens Collet Body For HW-9,20,20H,24W,25 Torches

Weldmark ER70S2 Steel TIG Rod 1# tube
Weldmark ER70S2 Steel TIG Rod 1# tube
Weldmark ER70S2 TIG Rod
Weldmark is a premium carbon steel multiple deoxidized wire. Produces high quality welds in most grades of carbon steels. E70S-2 is a triple deoxidized wire which provides defect free weld deposits when properly used on most carbon steels. It is used especially for pipe welding. ER70S-2 Conforms to AWS A5.18 ER70S-2

Weldmark ER4043 Aluminum TIG Rod 1# tube
Weldmark ER4043 Aluminum TIG Rod 1# tube
4043 is a general purpose type aluminum welding wire. It is one of the oldest and most widely used welding and brazing alloys. This aluminum alloy contains silicon additives, which result in improved fluidity (wetting action) of the weld pool and also produces a weld less sensitive to cracking. Its bright weld finish makes it a popular choice of welders. ER4043 can be used to weld various grades of aluminum.
AWS Class: ER4043 | Certification: AWS A5.10/ A5.10M:1999 |
Alloy: ER4043 | AWS/ASME SFA A5.10 |

Weldmark TIG Medium Size Back Cap For HW-20, HW-9 Torches
Weldmark TIG Medium Size Back Cap For HW-20, HW-9 Torches

J.W. Harris Compound 302 Postweld Stainless Steel Cleaner
J.W. Harris Compound 302 Postweld Stainless Steel Cleaner
Compound 302 Postweld Stainless Steel Cleaner
Effectively removes heat-tint, weld-burn and discoloration and rust from all grades of stainless steel. It is a unique chemical formulation of paste-like consistency, with mineral acids, deoxidizers and penetrants. The active ingredients dissolve the hard-to-remove blue oxidation color and weld-burn. It clings to vertical, horizontal and intricate surfaces and can be applied by a cloth. Compound 302 can also be used as a general acid cleaner for copper, brass and bronze.
Specifications:
Package Size | 24 oz. Container |
Rod Guard Polyethylene Blue Canister for 18″ – 36″ Electrode
Rod Guard Polyethylene Blue Canister for 18″ – 36″ Electrode
Rod Guard® Cannisters & Accessories provide great storage and inventory control for all your welding electrodes, rods and filler metals. And every one of them is made in America – and built to last.
Each Rod Guard® Cannister is certified chloride-free and features a threaded cap with long-lasting neoprene seal to keep electrodes airtight – preventing them from being contaminated with atmospheric moisture.
Because Rod Guard® Cannisters are constructed of high-impact polyethylene – which protect electrodes from damage – they can be reused for many years.
Can withstand up to 225° F and hold up to 36″
Capital Weld Cleaners Cleaning Solution 2-1/2 Gal
Capital Weld Cleaners Cleaning Solution 2-1/2 Gal
Capital Weld Cleaner’s most popular proprietary solution. This high quality solution can clean TIG, MIG, and spot welds. Must be used with electro-chemical weld cleaning machine to be effective.
· Can be suitable for other weld cleaner manufacturer’s electro-chemical weld cleaners
· When used with CWC 2X40 or 1X30 cleans and passivates stainless steel welds quickly and easily
· Cleans TIG, MIG, and Spot Welds
· Safer than pickling paste and doesn’t disrupt the surface like abrasives
Weldmark 2% Thoriated Tungsten 3/32″ X 7″
Weldmark 2% Thoriated Tungsten 3/32″ X 7″
Tungsten Electrode 3/32” X 7” Ground 2% Thoriated Tungsten
Extremely long lasting and highly durable, these electrodes are a staple in DC welding applications. They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current-carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. Compared with other electrodes, Thoriated electrodes deposit less tungsten into the weld puddle, so they cause less weld contamination.
These electrodes are used mainly for specialty AC welding (such as thin-gauge aluminum and material less than 0.060 inch) and DC welding, either electrode negative or straight polarity, on carbon steel, stainless steel, nickel, and titanium.
During manufacturing, thorium is evenly dispersed throughout the electrode, which helps the tungsten maintain its sharpened edge—the ideal electrode shape for welding thin steel—after grinding. Note: Thorium is radioactive; therefore, you must always follow the manufacturer’s warnings, instructions, and the Safety Data Sheet (SDS) for its use.
Weldmark TIG Collet 3/32″ For HW-17, 18, 26 Torches 5pk
Weldmark TIG Collet 3/32″ For HW-17, 18, 26 Torches 5pk
Weldmark 1/8″ TIG Gas Lens Collet Body For HW-20, 9, 25 Torches
Weldmark 1/8″ TIG Gas Lens Collet Body For HW-20, 9, 25 Torches
ESAB Rebel EMP 235ic Multi-Process Welder
ESAB Rebel EMP 235ic Multi-Process Welder
Introducing Rebel EMP 235ic – the next level Rebel welding machine that offers TRUE multi-process performance in a portable package. When it comes to getting around and getting work done, Rebel EMP 235ic is second to none. It is the most mobile welder in its class and has the power and performance to crush even the most demanding jobs.
PACKAGE INCLUDES:
▪ Rebel EMP 235ic power supply
▪ Tweco SprayMaster 250 MIG gun
▪ Victor argon flowmeter regulator
▪ 12.5 ft. (3.8 m) hose
▪ return clamp with leads, drive rolls and contact tips
▪ .035 in. (0.9 mm) wire
▪ electrode holder
▪ ESAB Atom Arc 7018 electrodes
▪ power adapter
▪ operator’s manual
Miller Multimatic 220 AC/DC
Miller Multimatic 220 AC/DC
The Miller Multimatic™ 220 AC/DC is a true multi-process welder that is capable of AC (aluminum) TIG welding. The Multimatic 220 AC/DC produces up to 230 amps of MIG welding output and up to 210 amps of TIG welding output. The complete portable MIG, Stick and AC/DC TIG welding package comes with Miller® MDX™-100 MIG welding gun, Weldcraft™ 150 amp TIG torch with accessories, remote foot control, two argon flow regulators with hoses, stick electrode holder and ground clamp.
The Multimatic™ 220 AC/DC comes standard with a color LCD screen and features Miller’s Auto-Set™ Elite. Auto-Set™ Elite sets MIG, Stick and TIG welding parameters automatically, all you need to do is enter metal thickness and welding wire or tungsten electrode diameter. It also allows you to fine tune weld settings manually to suit your individual preferences. The 220 AC/DC runs on either 120 volt or 240 volt input power, using Miller’s exclusive multi-voltage plug (MVP™) and weighs only 56 pounds.
907757 Multimatic 220
Comes complete with:
- Power source
- 10 ft. (3 m) MDX™-100 MIG gun
- 13 ft. (4 m) cable electrode holder and 25 mm Dinse-style connector
- 5 ft. (3.8 m) Weldcraft™ A-150 (WP-17) TIG torch with 25 mm Dinse-style connector
- 10 ft. (3 m) work cable with clamp and 25 mm Dinse-style connector
- 5 ft. (2 m) power cord with MVP™ plugs for 120 V and 240 V
- RFCS-14 HD foot control with 20 ft. (6 m) cord Two flow gauge regulators and gas hoses for argon or AR/CO2 mix
- Hobart® spool of .030 in. (0.8 mm) solid wire
- Two contact tips for .030 in. (0.8 mm) wire
- Quick Select™ drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. 8/0.9 mm) flux-cored wire
- AK2C TIG torch accessory kit
- Material thickness gauge
- Hook-and-loop cord wraps
Weldmark TIG Collet 3/32″ For HW-20, 9, 25 Torches
Weldmark TIG Collet 3/32″ For HW-20, 9, 25 Torches
Weldmark #10 Alumina Nozzle For HW-17,18,26 Torches
Weldmark #10 Alumina Nozzle For HW-17,18,26 Torches
Blue Demon Silicon Bronze TIG Welding Rod
Blue Demon Silicon Bronze TIG Welding Rod
Blue Demon Copper & Copper Alloy TIG Welding Rod has excellent welding properties and can be used on various applications.
ERCuSi-A
This silicon bronze (ERCuSi-A) rod is primarily used for MIG, TIG, and gas welding of copper, copper-silicon and copper-zinc base metals to themselves and to steel. It is an excellent choice for joining plain or galvanized sheet metal, as well as other coated steels. 1866° F melting point.