Oxyfuel Gas Welding (OAW)
Showing 21–40 of 70 resultsSorted by popularity
Weldcote Twin Welding Hose Reel with 1/4″ X 50′ Grade T Twin Hose
Weldcote Twin Welding Hose Reel with 1/4″ X 50′ Grade T Twin Hose
Weldcote brand Twin Welding hose ¼ x 50ft T grade hose for all fuel types. B size fittings.
Specifications:
- Connection Type: BB
- Gas Type: All Fuel Gases
- Grade: T
- Hose I.D. [Nom] ¼”
- Hose O.D. [Nom] 3/8”
- Length [Nom] 50FT
- Material: Synthetic Rubber
- Operating Temp. [Min] -40 °F
- Operating Temp. [Max] 212 °F
- Pressure [Max] 200 PSI
- Thread Direction: Oxygen RH/ Acetylene LH
Victor SR250C-540 Medium Duty Oxygen Single Stage Regulator, CGA-540
Victor SR250C-540 Medium Duty Oxygen Single Stage Regulator, CGA-540
SR 250 Series Oxygen Regulator
0781-0027
- Victor Professional Single Stage SR 250, Medium Capacity, C (80 PSIG), Oxygen, 540, 9/16-18 UNF (M). Medium duty gas control. Tried and true brass design delivers excellent gas control characteristics that meets the demands of precise cutting, welding and heating applications.
Features
- 2” brass gauges
- 75” diaphragm – fabric reinforced neoprene
Specifications
- 38” W x 5.13”H x 4.25”D
- Weight: 2 lbs. 15 oz.
- Delivery Range: 4-80 psig
- Max Inlet: 3,000 psig
- Outlet Connection: 9/16” – 18 (M)
- CGA: 540
J.W. Harris Stay-Clean Flux
J.W. Harris Stay-Clean Flux
Stay-Clean Liquid Soldering Flux is an inorganic acid & salt type flux. It is formulated to be active at temperatures optimum for a range of solder compositions and is ideal for soldering a variety of base metals.
Stay Clean liquid effectively removes surface oxide and prevents oxide formation during soldering. Stay Clean can be used with most tin based solder compositions and is an excellent companion flux with Harris Stay Brite® and Stay Brite® #8. Stay Clean is an active soldering flux. It works well on copper and brass but is more frequently used on base metals that require a more aggressive flux, such as steel, nickel, and stainless steel, (it is not suitable for aluminum or magnesium).
Minimal pre-cleaning is required with Stay Clean Flux, but it is good practice to remove excess oil, grease, or other surface contaminants prior to fluxing and soldering.
Flux should be applied with a brush or other type applicator. Avoid getting excess flux inside tube or other connections.
Flux residue is corrosive and a post-solder flux removal procedure should be employed. Because of this it is not recommended for use in electrical or electronic applications.
Victor G150-J-P Portable Tote without Tanks
Victor G150-J-P Portable Tote without Tanks
Victor Technologies G150-J-P Tote without tanks is designed for high capacity industrial applications.
DOES NOT INCLUDE TANKS.
Package Includes:
▪ G-150 oxygen and fuel regulators
▪ Carrying case (1421-0084)
▪ Handle (103-01fp)
▪ 0-w-j nozzle
▪ 2-w-j nozzle
▪ 12.5′ dual a 3/16 hose
▪ Goggles
▪ Check valve
▪ Striker
▪ Instruction manual
Victor Journeyman II Welding and Cutting Outfit
Victor Journeyman II Welding and Cutting Outfit
What’s Included:
· Edge 2.0 Series Regulators with Gauge Guards
· H315FC+ Extra Heavy Duty Torch Handle
· CA 2460+ Extra Heavy Duty Cutting Attachment
· Welding Nozzle, Size W2
· 1-1-101 Cutting Tip
· CA 2460+ extra heavy duty cutting attachment
· H315FC+ extra heavy duty torch handle
· T-grade hose 20′ x 1/4″ (6.1 m x 6.4 mm)
· Striker and tip cleaner
· Soft-sided shade 5 goggles
· Built-in flashback arrestors and reverse flow check valves
Best Welds 1/4″ X 100′ BB “T” Grade Oxy-Acetylene Hose
Best Welds 1/4″ X 100′ BB “T” Grade Oxy-Acetylene Hose
Victor SR260A-510 Medium Duty Acetylene Single Stage Regulator, CGA-510
Victor SR260A-510 Medium Duty Acetylene Single Stage Regulator, CGA-510
SR 250 Series Acetylene Regulator
0781-0087
- Victor Professional Single Stage SR 260, Medium Capacity, A (15 PSIG), Acetylene, 510, 9/16-18 UNF LH. Medium duty gas control. Tried and true brass design delivers excellent gas control characteristics that meets the demands of precise cutting, welding and heating applications.
Features
- 2” brass gauges
- 75” diaphragm – fabric reinforced neoprene
Specifications
- 38” W x 5.13”H x 4.25”D
- Weight: 2 lbs. 15 oz.
- Delivery Range: 2-15 psig
- Max Inlet: 3,000 psig
- Outlet Connection: 9/16” – 18 (M)
- CGA: 510
J.W. Harris Safety-Silv 45T Tin-Bearing Silver Brazing Alloy 1/16″ Coil
J.W. Harris Safety-Silv 45T Tin-Bearing Silver Brazing Alloy 1/16″ Coil
The Harris Products Group manufactures its complete line of cadmium-free, high silver brazing alloys with the same attention to quality found in their phosphorus/copper products. Only the purest metals are used. Precision production procedures ensure consistency in product quality and performance. Safety-Silv alloys are strongly recommended as replacements for all cadmium-bearing brazing filler metals.
Safety-Silv 45T is a tin-bearing silver brazing alloy which performs like a 45% silver, cadmium-bearing alloy, but is cadmium-free. It has a lower melting temperature than Safety-Silv 45 and excellent fillet-forming qualities. It produces high-strength ductile joints. NSF Certified to NSF 51.
Specifications:
| Diameter | 1/16″ |
Best Welds 1/4″ X 25′ Twin Welding Hoses All Fuel Gases BB, T Grade
Best Welds 1/4″ X 25′ Twin Welding Hoses All Fuel Gases BB, T Grade
Harper Series 140 Deluxe Uni-Handle Small to Large Cylinder Truck
Harper Series 140 Deluxe Uni-Handle Small to Large Cylinder Truck
Harper Trucks 142-86 deluxe model has refinements and features such as:
▪ Handle Bars With Hand Grips For Better Control And Stability When Moving The Loaded Unit.
▪ Welded On Tool Box.
▪ Hose Hooks And Welding Rod Holder Tubes Provide Greater Utility.
▪ Handles Small, Medium And Large Cylinders.
SPECIFICATIONS:
J.W. Harris AlSolder 500 Aluminum Solder Kit
J.W. Harris AlSolder 500 Aluminum Solder Kit
The Harris Al-Solder 500 aluminum solder & flux kit for torch or iron is used all solder-able alloys to each other and to dissimilar metals. Also for zinc die-cast. Forms excellent, corrosion resistant joints on the tough to solder aluminum alloys. Also beneficial as a high temperature solder on most other metals. Not recommended for magnesium.
Forms excellent corrosion resistant joints on the tough-to-solder aluminum alloys. Joins all solder-able aluminum alloys to each other and to dissimilar metals, both ferrous and nonferrous. Also beneficial as a high temperature solder on most other metals.
Procedure:
- Clean the area to be soldered
- Apply Stay Clean aluminum flux
- If using an open flame, heat indirectly with the torch in motion (do not direct the torch on the flux)
- Heat until the flux becomes a nut brown color
- Apply the alloy
- Discontinue heat as soon as flow
- Allow to cool. Remove flux residue with wire brush and hot water
Features:
· Tensile strength – Up to 20,000 PSI
· Solidus – 391ºF
· Liquidus – 482ºF
· Good color match on aluminum and zinc die cast
Specifications:
|
Package Includes |
1.75 oz Al-solder 500 1 oz Stay-Clean Aluminum Flux |
|
|
|
J.W. Harris Low Fuming Bronze 15 Bare Copper Alloy Gas Rod 3/32″ X 36″ 10# PKG
J.W. Harris Low Fuming Bronze 15 Bare Copper Alloy Gas Rod 3/32″ X 36″ 10# PKG
The Harris 15 Low Fuming Brazing Bronze is copper- zinc braze rod developed primarily to braze steel and some cast iron grades including malleable and grey iron. It can be used to join copper but due to the elevated melting temperature care must be taken during brazing to avoid overheating or melting the copper. It is used with the oxy-fuel process.
Harris 15 is considered a “braze-welding”
Hydrogen
Hydrogen
Purchase Cylinder
Purchase Price Includes: Cylinder + Gas + Fees
Details
▪ Cylinder will come with valid DOT stamp, current hydrostatic test stamp, and a record of ownership.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Purchased cylinders may be exchanged or refilled at any gas supplier
Lease Cylinder
Lease Price Includes: A Full Cylinder + Maintenance Costs
Details
▪ 5 year lease length
▪ Early termination of the lease is available without additional charges.
▪ Leased cylinders can only be refilled/exchanged at a Toll location.
▪ Cylinder exchange/refills charges are not included in lease and will be charged at the time of exchange.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Leased cylinders must be returned at the end of the lease agreement or customer will be charged the replacement cost of the cylinder.
Exchange/Refill Cylinder
Price Includes: Gas + Fees
Details
▪ Only cylinders owned by customer, rented or leased from Toll are eligible for exchange/refill.
▪ Empty cylinders can be exchanged for a full cylinder at store location.
▪ Exchanged tank will be of like gas and size.
▪ An additional hydrostatic test fee may apply on customer owned cylinders upon visual inspection.
▪ Cylinder appearance is not guaranteed to look new or be of similar condition as the cylinder that is exchanged.
Other Options Available In Store:
Rent Cylinder
Cylinders are available to rent daily, weekly, and monthly upon approved credit. Please contact us directly for details.
Cylinder Disposal
Cylinder disposal or recycling is available for common gases. We reserve the right to refuse any cylinder upon visual inspection.
Cylinders we will not accept for disposal include:
▪ Inhalation hazard
▪ Poisons
▪ Refrigerants
▪ Any cylinders with a missing label
▪ Uncommon cylinder sizes
Weldmark Flashback Arrestor (Torch Set)
Weldmark Flashback Arrestor (Torch Set)
Weldmark Flashback Arrestor Torch Set
- Built in check valve presents reverse flow
- Fits all 9/16’ – 18” “B” size regulators & torches
- 100% factory flame & leak tested
Western Hotspotter WB-101 Heavy-Duty Flame Propane Tool Kit
Western Hotspotter WB-101 Heavy-Duty Flame Propane Tool Kit
This Hotspotter is an all-purpose propane flame tool that operates off the pressure of a standard propane tank-no regulator required. Ergonomic handle with adjustable trigger. Hooks up to standard 20 lb. Propane tank. Operates with no smoke and no fumes.
Appropriate for a wide variety of all-season maintenance/repair applications at commercial offices, factories, institutions, warehouses, parks, residential properties, farms, and parking lots.
Some uses include:
▪ Burn weeds
▪ Repair asphalt
▪ Seal tar
▪ Peel paint
▪ Remove road markings
▪ Melt ice
▪ Thaw pipes
Features and Specifications:
▪ Delivers up to 550,000 BTU
▪ Durable 10 ft. neoprene hose
▪ Accurate brass flow control shut-off valve
▪ Brass propane tank adaptor
▪ Spark ignitor
▪ Durable cast iron and steel nozzle (WB-101)
▪ Welded tube nozzle (WB-100 & WB-102)
▪ 31″ Heavy-Duty Handle
▪ Meets NFPA 51 specifications
▪ Excess Flow Valve
▪ One year warranty
Victor TurboTorch Sof-Flame WA-400 Acetylene Torch Handle
Victor TurboTorch Sof-Flame WA-400 Acetylene Torch Handle
Victor Turbo Torch Genuine Sof-Flame WA-400 Acetylene Torch Handle for your Sof-Flame soldering equipment. Handle accepts all S series tips and most major brands of “screw-in” soldering tips.
Miller-Smith Heavy Duty 90 Degree SC Cutting Attachment
Miller-Smith Heavy Duty 90 Degree SC Cutting Attachment
Cuts up to 8-inch (203 mm) thick steel. Solid silver-brazed construction. Features o-ring seating and easy-to-change slip-in Graf-Tite cutting tips with cost-saving soft seats. Use with any industrial fuel gases “” acetylene, propane, natural gas, propylene, hydrogen, and many others. Several models of standard and special-purpose tips are available for use in SC200 Series cutting attachments. SC200 series torch handles are covered by our lifetime warranty when used with authentic Miller | Smith tips.
Compatible Handles:
- WH200A
Compatible Tips: Welding: SC Series Tips
FEATURES:
SPECIFICATIONS:
Best Welds 3/8″ X 50′ BB “T” Grade Oxy-Acetylene Hose
Best Welds 3/8″ X 50′ BB “T” Grade Oxy-Acetylene Hose
Best Welds 1/4″ X 50′, Twin Welding Hoses, All Fuel Gases, BB, T Grade
Best Welds 1/4″ X 50′, Twin Welding Hoses, All Fuel Gases, BB, T Grade
Harper Series 100 Uni-Handle,Small to Medium Cylinder Truck
Harper Series 100 Uni-Handle,Small to Medium Cylinder Truck
It is recommended for small shops and garages having hard surface floors. Hand truck has a cylinder hold chain and hose hook. Concealed angle legs prevent load from resting on wheels when truck is stationary. Designed for small to medium cylinders.
SPECIFICATIONS:
