Shop
Showing 1–20 of 756 resultsSorted by popularity
Best Welds Single Line Welding Hoses, 1/4″ Oxygen, T Grade
Best Welds Single Line Welding Hoses, 1/4″ Oxygen, T Grade
Argon/CO2
Argon/CO2
Purchase Cylinder
Purchase Price Includes: Cylinder + Gas + Fees
Details
▪ Cylinder will come with valid DOT stamp, current hydrostatic test stamp, and a record of ownership.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Purchased cylinders may be exchanged or refilled at any gas supplier
Lease Cylinder
Lease Price Includes: A Full Cylinder + Maintenance Costs
Details
▪ 5 year lease length
▪ Early termination of the lease is available without additional charges.
▪ Leased cylinders can only be refilled/exchanged at a Toll location.
▪ Cylinder exchange/refills charges are not included in lease and will be charged at the time of exchange.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Leased cylinders must be returned at the end of the lease agreement or customer will be charged the replacement cost of the cylinder.
Exchange/Refill Cylinder
Price Includes: Gas + Fees
Details
▪ Only cylinders owned by customer, rented or leased from Toll are eligible for exchange/refill.
▪ Empty cylinders can be exchanged for a full cylinder at store location.
▪ Exchanged tank will be of like gas and size.
▪ An additional hydrostatic test fee may apply on customer owned cylinders upon visual inspection.
▪ Cylinder appearance is not guaranteed to look new or be of similar condition as the cylinder that is exchanged.
Other Options Available In Store:
Rent Cylinder
Cylinders are available to rent daily, weekly, and monthly upon approved credit. Please contact us directly for details.
Cylinder Disposal
Cylinder disposal or recycling is available for common gases. We reserve the right to refuse any cylinder upon visual inspection.
Cylinders we will not accept for disposal include:
▪ Inhalation hazard
▪ Poisons
▪ Refrigerants
▪ Any cylinders with a missing label
▪ Uncommon cylinder sizes
Lincoln Viking 3350 Series Outside Cover lens
Lincoln Viking 3350 Series Outside Cover lens
Argon
Argon
Purchase Cylinder
Purchase Price Includes: Cylinder + Gas + Fees
Details
▪ Cylinder will come with valid DOT stamp, current hydrostatic test stamp, and a record of ownership.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Purchased cylinders may be exchanged or refilled at any gas supplier
Lease Cylinder
Lease Price Includes: A Full Cylinder + Maintenance Costs
Details
▪ 5 year lease length
▪ Early termination of the lease is available without additional charges.
▪ Leased cylinders can only be refilled/exchanged at a Toll location.
▪ Cylinder exchange/refills charges are not included in lease and will be charged at the time of exchange.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Leased cylinders must be returned at the end of the lease agreement or customer will be charged the replacement cost of the cylinder.
Exchange/Refill Cylinder
Price Includes: Gas + Fees
Details
▪ Only cylinders owned by customer, rented or leased from Toll are eligible for exchange/refill.
▪ Empty cylinders can be exchanged for a full cylinder at store location.
▪ Exchanged tank will be of like gas and size.
▪ An additional hydrostatic test fee may apply on customer owned cylinders upon visual inspection.
▪ Cylinder appearance is not guaranteed to look new or be of similar condition as the cylinder that is exchanged.
Other Options Available In Store:
Rent Cylinder
Cylinders are available to rent daily, weekly, and monthly upon approved credit. Please contact us directly for details.
Cylinder Disposal
Cylinder disposal or recycling is available for common gases. We reserve the right to refuse any cylinder upon visual inspection.
Cylinders we will not accept for disposal include:
▪ Inhalation hazard
▪ Poisons
▪ Refrigerants
▪ Any cylinders with a missing label
▪ Uncommon cylinder sizes
3M Speedglas Outside Cover Plate For 9100 Series Helmet
3M Speedglas Outside Cover Plate For 9100 Series Helmet
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec ER5356 Aluminum MIG Wire
AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi5 (DIN)
- ISO designation: AlMg5Cr(A)
- Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
- Applicable specifications: ANSI/AWS A5.10 (ER & R)
Weldmark Brush Scratch SS Curved Handle Toothbrush 3″ X 7″
Weldmark Brush Scratch SS Curved Handle Toothbrush 3″ X 7″
Tregaskiss 1/16″ TOUGH LOCK Heavy Duty Contact Tip
Tregaskiss 1/16″ TOUGH LOCK Heavy Duty Contact Tip
Tregaskiss 403-20-116 1/16″ TOUGH LOCK™ Heavy Duty Contact Tip
- For 1/16″ (1.6 mm) wire
- Locking feature prevents contact tip and retaining head from overheating due to the loosening vibration often causes – cooler temperatures reduces wear and extends consumable life
- Greater Surface area contact between the contact tip, retaining head and neck ensures better heat dissipation and guarantees positive electrical conductivity
Carbon Dioxide
Carbon Dioxide
Purchase Cylinder
Purchase Price Includes: Cylinder + Gas + Fees
Details
▪ Cylinder will come with valid DOT stamp, current hydrostatic test stamp, and a record of ownership.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Purchased cylinders may be exchanged or refilled at any gas supplier
Lease Cylinder
Lease Price Includes: A Full Cylinder + Maintenance Costs
Details
▪ 5 year lease length
▪ Early termination of the lease is available without additional charges.
▪ Leased cylinders can only be refilled/exchanged at a Toll location.
▪ Cylinder exchange/refills charges are not included in lease and will be charged at the time of exchange.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Leased cylinders must be returned at the end of the lease agreement or customer will be charged the replacement cost of the cylinder.
Exchange/Refill Cylinder
Price Includes: Gas + Fees
Details
▪ Only cylinders owned by customer, rented or leased from Toll are eligible for exchange/refill.
▪ Empty cylinders can be exchanged for a full cylinder at store location.
▪ Exchanged tank will be of like gas and size.
▪ An additional hydrostatic test fee may apply on customer owned cylinders upon visual inspection.
▪ Cylinder appearance is not guaranteed to look new or be of similar condition as the cylinder that is exchanged.
Other Options Available In Store:
Rent Cylinder
Cylinders are available to rent daily, weekly, and monthly upon approved credit. Please contact us directly for details.
Cylinder Disposal
Cylinder disposal or recycling is available for common gases. We reserve the right to refuse any cylinder upon visual inspection.
Cylinders we will not accept for disposal include:
▪ Inhalation hazard
▪ Poisons
▪ Refrigerants
▪ Any cylinders with a missing label
▪ Uncommon cylinder sizes
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire
Alcotec Alloy 4047 was originally developed as a brazing alloy (BAlSi-4) OR (718) to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than 4043, which provides for increased fluidity and reduced shrinkage. The alloy produces bright and almost smut free welds. Hot cracking is significantly reduced when 4047 is used as a filler alloy. The alloy may be used in applications of sustained elevated temperatures.
Typical Applications
- Trade designation: ALMIGWELD and ALTIGWELD
- Non-Heat treatable
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- ISO designation: AlSi12
- Principle alloying elements: Silicon
- Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190
3M Particulate Filter 7000(AAD), P100 2PK
3M Particulate Filter 7000(AAD), P100 2PK
- Exceptional 99.97% filter efficiency meets NIOSH P100-series test criteria
- Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
- Versatile protection against many oil and non-oil based particulate contaminants
- Bayonet compatibility allows use with many 3M™ half and full facepiece designs
- Wide range of applications reduces inventory needs and training requirements
NIOSH approved for environments containing certain oil and non-oil based particles.
The 3M™ Particulate Filter 2091, P100 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. 3M’s Advanced Electret Media (AEM) provides a comfortable lightweight, easy-breathing combination. The 2091 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. Industries where this filter is commonly used include agriculture, construction, general manufacturing, pharmaceuticals and primary metals.
The filter works with a wide range of facepieces, including 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series. If used with 3M™ Adapter 502, the filter may also be used with 3M™ Respirator 5000 Series or 3M™ Cartridge 6000 Series. The filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain oil and non-oil based particles. The filter has been assigned the color code “magenta” in the NIOSH system. Passing NIOSH’s P-series test criteria, the 2091 P100 filter provides at least 99.97 percent filter efficiency against particles.
Breathing hazardous particles can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Particulate Filter 2091 to help reduce exposure to certain particles.
Metal Man Heavy Duty Single/Dual Bottle Welding Cart
Metal Man Heavy Duty Single/Dual Bottle Welding Cart
The METAL MAN Heavy Duty Single/Dual Bottle Welding Cart is designed for multiple uses. It can be used to hold portable wire welders, plasma cutters and TIG welders along with the bottle of shielding gas needed for that application. Its unique Cylinder rack allows you to configure it to carry one bottle of gas up to 10 inches in diameter and up to 300 cu. Ft.; or two separate bottles of gas up to 7-1/2 inches in diameter or 150 cu. Ft each. Or use this welding cart to hold two separate welders or a welder and a plasma cutter. The third use for this Cart is as a power source and feeder cart. The bottom shelf has an 18 inch clearance, giving ample space to store a smaller, inverter-based welding power source on the bottom shelf. The top shelf has ample space to fit a wire feeder. In addition, the top of the cylinder securement rack can be removed to accommodate the wire feeder spool holder and a large spool of wire.
SPECIFICATIONS:
- Holds one 10” dia. Cylinder or two 7-1/2” dia. Cylinder
- Fold Down Handle
- Wrap Around Cable Holders
- 400 lb. Capacity
- 8” Rear Wheels
- 2 Locking Front Casters
- Removable Top Cylinder Rack For Industrial Wire Feeder Applications
- 18 Gauge Steel Construction with Powder Coat Finish
FEATURES:
Best Welds 4″ X 5″ Clear Welding Helmet Lenes
Best Welds 4″ X 5″ Clear Welding Helmet Lenes
Weldmark 1/8″ TIG Gas Lens Body For HW-9,20,20H,24W,25 Torches
Weldmark 1/8″ TIG Gas Lens Body For HW-9,20,20H,24W,25 Torches
Fox Fire Abrasive Disc Conditioner
Fox Fire Abrasive Disc Conditioner
FOXFIRE Abrasive Conditioner
FOXFIRE™ is a revolutionary new grinding lubricant formulated to dramatically extend the life of abrasives and make grinding easier. FOXFIRE™ is a white, extra dry solid that is very clean to use. When applied to an abrasive surface, friction from grinding causes the FOXFIRE™ coating to melt, liquefy and act as a lubricant and release agent. Materials being ground do not load or clog cutting surfaces so abrasives run cooler and last longer. Unlike beeswax or petroleum based products, FOXFIRE™ is not sticky and parts can be blown clean.
FOXFIRE™ works best for grinding aluminum or plastic, removing automotive paint, or any other material that can melt into or clog abrasive surfaces. Discs or belts treated with FOXFIRE™ last longer… up to twenty times longer when grinding aluminum. Abrasive wheel cut off blades treated with FOXFIRE™ cut aluminum like butter without build-up on the cutting wheel. FOXFIRE™ also extends the life of abrasives used to grind stainless steel and carbon steel and leaves no residue that can affect welds made after grinding. In addition, FOXFIRE™ works well on saw blades, taps, drill bits and many other applications where a lubricant or release agent is needed or liquid coolant cannot be used.
Benefits:
▪ FOXFIRE™ increases productivity
▪ Non-toxic and safe
▪ Abrasives stay sharp much longer and cut faster
▪ Time once spent changing discs or belts can be used for grinding
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark® By ESAB® 70S-6 MIG Wire
For work with filler metals, Weldmark® By ESAB® 70S-6 MIG Wire contains higher levels of deoxidizers (manganese and silicon) and lower carbon levles as compared to a general purpose wire. The high content of deoxidizers allow welding over heavier amounts of dirt, rust and mill scale while providing a more fluid puddle and smoother bead profile.
Weldmark® By ESAB® 70S-6 MIG Wire has excellent feedability, consistency and exceptional arc characteristics. This wire delivers a very stable arc, resulting in less spatter, less clean up time and improved performance. This is a perfect choice when seeking a wire for semi-automatic, automatic and robotic welding applications.
AWS Classification – AWS SFA5.18; ER70S-6
Classifications/Approvals – Certified by C.W.B.: CSA W48B – G49A3CG6 ASME SFA 5.18 ER70S-6
Oxygen
Oxygen
Purchase Cylinder
Purchase Price Includes: Cylinder + Gas + Fees
Details
▪ Cylinder will come with valid DOT stamp, current hydrostatic test stamp, and a record of ownership.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Purchased cylinders may be exchanged or refilled at any gas supplier
Lease Cylinder
Lease Price Includes: A Full Cylinder + Maintenance Costs
Details
▪ 5 year lease length
▪ Early termination of the lease is available without additional charges.
▪ Leased cylinders can only be refilled/exchanged at a Toll location.
▪ Cylinder exchange/refills charges are not included in lease and will be charged at the time of exchange.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Leased cylinders must be returned at the end of the lease agreement or customer will be charged the replacement cost of the cylinder.
Exchange/Refill Cylinder
Price Includes: Gas + Fees
Details
▪ Only cylinders owned by customer, rented or leased from Toll are eligible for exchange/refill.
▪ Empty cylinders can be exchanged for a full cylinder at store location.
▪ Exchanged tank will be of like gas and size.
▪ An additional hydrostatic test fee may apply on customer owned cylinders upon visual inspection.
▪ Cylinder appearance is not guaranteed to look new or be of similar condition as the cylinder that is exchanged.
Other Options Available In Store:
Rent Cylinder
Cylinders are available to rent daily, weekly, and monthly upon approved credit. Please contact us directly for details.
Cylinder Disposal
Cylinder disposal or recycling is available for common gases. We reserve the right to refuse any cylinder upon visual inspection.
Cylinders we will not accept for disposal include:
▪ Inhalation hazard
▪ Poisons
▪ Refrigerants
▪ Any cylinders with a missing label
▪ Uncommon cylinder sizes
J.W. Harris Stay Clean Paste Flux – 4oz
J.W. Harris Stay Clean Paste Flux – 4oz
Stay-Clean Paste Soldering Flux is designed primarily for copper to copper and copper to brass connections the paste form is ideal for soldering tube joints. Not recommended for electrical or electronic applications due to the potential corrosive residue of the flux. Stay Clean Paste flux works well with most leaded and lead-free solder compositions. Flux residue should be removed after soldering.
Specifications:
|
Package Size |
4 oz. Bottle |
