Wire

Showing 1–20 of 28 results

AlcoTec ER5356 Aluminum MIG Wire

AlcoTec Almigweld is made of 5356 alloy that has magnesium, manganese, chromium and titanium as the principle alloying elements. Non-heat treatable wire with 1060 to 1175 deg F melting range is classified as a general-purpose type filler alloy.

Typical Applications

Trade designation: ALMIGWELD and ALTIGWELD
Non-Heat treatable
Similar to AlSi5 (DIN)
ISO designation: AlMg5Cr(A)
Principle alloying elements: Magenesium, Maganese, Chromium, Titanium
Applicable specifications: ANSI/AWS A5.10 (ER & R)

535601035, 535615035, 535620047, 535620062, 535601030, 435601025,

$15.20

Quick View

AlcoTec ER4047 .035 1# Spool Aluminum MIG Wire

Alcotec Alloy 4047 was originally developed as a brazing alloy (BAlSi-4) OR (718) to take advantage of its low melting point and narrow freezing range. In addition, it has a higher silicon content than 4043, which provides for increased fluidity and reduced shrinkage. The alloy produces bright and almost smut free welds. Hot cracking is significantly reduced when 4047 is used as a filler alloy. The alloy may be used in applications of sustained elevated temperatures.

Typical Applications

Trade designation: ALMIGWELD and ALTIGWELD
Non-Heat treatable
Similar to AlSi12 (Germany), BS N21 (United Kingdom)
ISO designation: AlSi12
Principle alloying elements: Silicon
Applicable specifications: ANSI/AWS A5.10 (ER & R), AMS 4190

404715035, 404701030,

$11.75

Quick View

ESAB Dual Shield 7100 Ultra E71T-1CH8/E71T-9MD Gas Shielded Flux Core Carbon Steel Tubular Wire .045 33# Spool

Quick Add

ESC248000044

248000044

$198.00

Quick View

Hobart FabTuf 960 Gas Shielded Flux Core Hard Face Alloy Steel Tubular Wire .045 33# Spool

Quick Add

HBCS234212-093

S234212-029

$301.55

Quick View

AlcoTec ER4043 Aluminum MIG Wire

ALC4043

404301030, 404301035, 404301047, 404315035, 404320047, 404320062, 404301062, 404315030

$15.40

Quick View

Weldmark 71TGS Self Shielding MIG Wire

E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.

WM71TGS03010, WM71TGS0302, WM71TGS03510, WM71TGS0352

$20.00

Quick View