Welding Supplies
Showing 141–160 of 445 resultsSorted by popularity
Black Stallion Premium Grain Cowhide MIG Glove
Black Stallion Premium Grain Cowhide MIG Glove
Black Stallion Premium Grain Cowhide MIG Glove
FEATURES & BENEFITS
- Premium grain cowhide
- Seamless index finger for extra dexterity
- Unlined to maintain finger control
- Kevlar® stitching provides spark and abrasion resistance
J.W. Harris Stay-Clean Flux
J.W. Harris Stay-Clean Flux
Stay-Clean Liquid Soldering Flux is an inorganic acid & salt type flux. It is formulated to be active at temperatures optimum for a range of solder compositions and is ideal for soldering a variety of base metals.
Stay Clean liquid effectively removes surface oxide and prevents oxide formation during soldering. Stay Clean can be used with most tin based solder compositions and is an excellent companion flux with Harris Stay Brite® and Stay Brite® #8. Stay Clean is an active soldering flux. It works well on copper and brass but is more frequently used on base metals that require a more aggressive flux, such as steel, nickel, and stainless steel, (it is not suitable for aluminum or magnesium).
Minimal pre-cleaning is required with Stay Clean Flux, but it is good practice to remove excess oil, grease, or other surface contaminants prior to fluxing and soldering.
Flux should be applied with a brush or other type applicator. Avoid getting excess flux inside tube or other connections.
Flux residue is corrosive and a post-solder flux removal procedure should be employed. Because of this it is not recommended for use in electrical or electronic applications.
MCR Safety Work Glove XL
MCR Safety Work Glove XL
MCR Safety Work Glove
- The best grade of select shoulder split leather gives you protection from the tough junk you have to deal with on the job
- Shirred elastic back
- Split standard shoulder leather cut
- Features poly cotton type thread
- Comprises gunn type pattern
- Has a thickness of 1.0 – 1.6 mm
- 2-1/2 in cuff length
- Recommended for laundering
- Blue and yellow with black stripes fabric
Black Stallion Split Cowhide Stick Glove with Palm Guard
Black Stallion Split Cowhide Stick Glove with Palm Guard
FEATURES & BENEFITS
- Split cowhide
- Exclusive CushionCore™ padded liner
- Wide palm guard
- Kevlar® stitching provides spark and abrasion resistance
- Sizes: Large Only
Miller Millermatic 142 MIG Welder
Miller Millermatic 142 MIG Welder
DC1241 Millermatic 142 English
Comes complete with:
- Power source
- 10 ft. (3 m) MDX™-100 MIG gun
- 10 ft. (3 m) work cable with clamp
- 6.5-ft DC1241 Millermatic 142 English(2 m) power cord with plug
- Flow gauge regulator and gas hose for argon or AR/CO2 mix
- Hobart® spool of .030 in. (0.8 mm) solid wire
- Two contact tips for .030 in. (0.8 mm) wire
- Quick Select™ drive rolls for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
- Material thickness gauge
- Hook-and-loop cord wraps
ESAB Atom Arc 7018 Low Hydrogen Stick Electrode
ESAB Atom Arc 7018 Low Hydrogen Stick Electrode
Weldmark 1/0 & 2/0 Cable Connector
Weldmark 1/0 & 2/0 Cable Connector
Cam action design of male half connector pulls the two halves tightly together. Connector covers are molded from a special heat and cold resistant material. Cable quick connects allow the welding machine operator to quickly remove the cables from the welding machine or add extensions onto the existing cables.
Specifications
· Amps: 350 Amps
· Color: Black
· Style: Set
· Cable Capacity: 1/0-2/0
Weldmark 300 Amp Ground Clamp With Steel Jaw
Weldmark 300 Amp Ground Clamp With Steel Jaw
Weldmark Light duty metal 300amp ground clamp for light duty work.
Specifications
· Material Composition: Steel
· Amperage Capacity: 300
· Cable Connection: Bolt-On
· Jaw Opening: 2″
· Cable Capacity: 1/0-2/0
· Style: Economy
Lincoln Super Arc L-59 ER70S-6 Copper Coated Carbon Steel MIG Wire .035 44# Spool
Lincoln Super Arc L-59 ER70S-6 Copper Coated Carbon Steel MIG Wire .035 44# Spool
Specifications
| Diameter: | .035 |
| Package: | 44 lb. Spool |
| SKU: | LINED032366 |
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
3/32” X 7” 2% Lanthanated tungsten electrodes (AWS classification EWLa-2) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated. These electrodes have excellent arc starting, a low Burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.
CK Worldwide Layzr Tungsten 1/8″ X 7″
CK Worldwide Layzr Tungsten 1/8″ X 7″
Tungsten Electrode 1/8” x 7” Layzr Non-Radioactive.
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
Weldmark TIG Collet 1/8″ For HW-17, 18, 26 Torches
Weldmark TIG Collet 1/8″ For HW-17, 18, 26 Torches
Weldmark #8 Premium Alumina Nozzle For HW-9,20,25 Torches
Weldmark #8 Premium Alumina Nozzle For HW-9,20,25 Torches
Weldmark TIG Short Back Cap For Hw-17, 18, 26 Tig Torches
Weldmark TIG Short Back Cap For Hw-17, 18, 26 Tig Torches
TIG Finger
TIG Finger
You don’t have to sacrifice your fingers for a pretty weld!
The Tig Finger® has become a welding industry standard, allowing welders to slide smoothly along hot metal,
It’s like having a prop in your pocket! And trust me… It’s durable…You’ll most likely lose it before you wear it out.
Don’t buy into imitations. Trust the original Tig Finger Heat Shield®.
**Tig Finger® Heat Shield is 100% Asbestos free and 100% Awesome, hand-made right here in the USA.
· Protects your finger from heat
· Allows you to make long weld passes
· Protects your welding gloves from becoming burned
· Durable and fits on your existing welding glove
· Perfect for the hobbyists or experienced welder
TEC Welding Speedway Deluxe TIG Torch Packaged 25′
TEC Welding Speedway Deluxe TIG Torch Packaged 25′
TEC Welding Speedway SW-320-25DX Deluxe w/25′ TIG Torch Package
Deluxe Torch Package Includes:
- Torch body & handle
- Braided rubber hoses
- Power cable assembly
- Premium leather cable cover
- 3/32″ collet and collet body
- #6 alumina nozzle
- 3/32″ x 7″ tungsten electrode
- Short, medium and long back caps
The new Speedway series torches bring together the best in design materials and workmanship to give today’s professional TIG welder the features to achieve unprecedented performance.
Features such as silver brazed copper construction which increases electrical current capacity and dissipates heat most efficiently.
Resilient high temperature silicone rubber insulation with high dielectric properties which resist “HF” current leakage, chipping, cracking and withstands temperatures to 500°F.
Modern flexible over braided rubber hoses and power cables provide flexibility and maneuverability not available with traditional vinyl tube materials. Larger copper conductors that have greater current carrying capacity.
Speed Nut hose connections mean no more troublesome wire clamps. No tools or special hose assemblies required.
The new Speed Bump ergonomic handle shape lays comfortably in the hand. The handle can be rotated 360° for the optimum position to allow for long work cycles without tiring. The built-in retaining ring keeps the cable cover securely in place.
The Speed Angle off-set torch body allows the welder access to difficult weld locations yet remains comfortable to hold.
Quality construction, modern design and premium materials while retaining the use of industry standard parts, such as collets, collet bodies, gas lenses, back caps and nozzles.
This interchangeability keeps costs low and accessories readily available to keep these torches working for years to come.
Quality, Performance and Made in America.
Best Welds 125 Amp Air Cooled TIG Torch Flex w/Valve Head
Best Welds 125 Amp Air Cooled TIG Torch Flex w/Valve Head
